Hyper-X High-Power LED Driver for Custom LED Lighting on Motorcycles | Custom LED

Pilote LED haute puissance Hyper-X

Name: Pilote LED haute puissance Hyper-X
Brand: Custom LED
SKU: HP_DRV1_REV0
Price: 23.16 USD
Availability: InStock

P/N: HP_DRV1_REV0

$23.16 ~~$29.86~~

In Stock! Order within 5 hours and 5 minutes to ship today! Click Add to Cart to view available shipping methods and rates.

Pilote à semi-conducteurs, régulateur de courant, double sortie pour modules LED Hyper-X.
Fonctionne avec une double intensité pour les applications de marche/freinage ou de marche/tour.
Un Driver peut alimenter 3 modules LED rouges ou jaunes, OU 2 modules blancs ou bleus (voir installation).
Nécessite des modules LED Hyper-X .
Fabriqué aux Etats-Unis.
Garantie 1 an et garantie de satisfaction .
Expédition le même jour ouvrable.

Aperçu
Caractéristiques
Installation
Accessoires recommandés

Aperçu

Le pilote LED Hyper-X est conçu pour alimenter les modules LED Hyper-X avec une double intensité et une régulation de courant. Le pilote a deux entrées (dim/lumineux) et une sortie pour se connecter au(x) module(s) LED Hyper-X.

Un seul pilote alimentera jusqu'à 3 modules LED rouges ou oranges et 2 modules LED blancs ou bleus lorsqu'ils sont câblés conformément aux instructions fournies.

Caractéristiques

Installation

Accessoires recommandés

These products are recommended accessories specifically for the Pilote LED haute puissance Hyper-X. Click on them to learn more.

Instagram Feed

Tag us @Custom_LED_LLC in your Instagram Photos to see your photos here!

Customer Reviews

0.0 Based on 0 Reviews

5 ★

4 ★

3 ★

2 ★

1 ★

Write a Review Ask a Question

Reviews
Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Rob 09/02/2023

The hyper x module and driver when brake is applied it's not goofy flashing is it it's just constant bright or run right

Answers (1)

Custom LED 09/04/2023

Hi Rob, not sure I completely understand your question. The Hyper-X LED LED driver is simply a dual input constant-current driver. It will operate the Hyper-X LEDs at the correct current for dim and bright operation. If you want a brake modulator, you would add this to the input of the Hyper-X LED Driver.

Brandon m. 08/15/2022

My OEM tail light is a single led and the current runs through a module that limits it to 250ma for running tail light and when brakes are applied it increases the current to about 500ma, increasing the brightness. Will this led operate as needed under those parameters, or would I have to bypass the module and use the hyper-x driver?

Answers (1)

Custom LED 08/15/2022

Hello Brandon, our Hyper-X LED modules are designed to only operate with our Hyper-X driver. 500mA is way too much for our Hyper-X LED and you will certainly burn it out. I don't think the Hyper-X driver will work properly either if you are feeding it a constant-current input. It would be best if you could find straight +12V for the run input, and a +12V for the brake input (tap off of the brake switches themselves. Best Regards, Jon Owner - Custom LED

Nathan 09/02/2021

Do I still need the 2 blinker genies in conjunction with this for my ‘00 Honda Shadow Ace Deluxe?

Answers (1)

Custom LED 09/02/2021

Hello Nathan, thank you for your interest in our products! Typically the Blinker Genie is not used in conjunction with our Hyper-X modules as they already support dim/bright functionality thus the blinker genie is not required.

Perhaps you meant to say Flasher Relay? In that case, you should definitely replace your flasher relay with the appropriate ELFR relay on our site if you plan to remove any of the OEM turn signals.

For your bike (VT750) our ELFR-1 is the correct flasher relay.

Best Regards,

Jon
Owner - Custom LED

Rob 09/27/2019

How long are the leads on hyper x and driver? Looking for super bright red for custom tail light. 2 run/turn 2 run/brake in each saddlebag lid Ty

Answers (1)

Custom LED 09/27/2019

Hello Rob, thank you for your interest in our products. The wire leads on the Hyper-X Drivers are about 8 inches. Likewise, the wire leads on the LEDs themselves are about the same. You could always extend the wire as necessary with any 22AWG or larger wire you see fit.

Kevin S. 06/14/2017

What is the IP rating of this product?

Answers (1)

Custom LED 06/15/2017

Hello, and thank you for your interest in our products. This product has not been rated for IP (International Protection Marking). The IP rating classifies and rates the degree of protection provided against intrusion (body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures.

As far as water intrusion goes, we highly recommend you mount the drivers in a location that will not see sustained and direct water contact. If you have no choice, apply some sealant to the open ends of the casing where the wires exit the driver and that will make it highly water resistant.