Blinker Genie front DRL MOD - Pre-Wired for 2011-2013 Ducati Diavel – Custom LED
MENUCART

Blinker Genie - Pre-Wired for 2011-2013 Ducati Diavel

  |  
P/N: BGDIAVEL_REV0

Custom LED

$89.99 $112.99

In Stock! Order now to ship on the next business day. Click Add to Cart to view available shipping methods and rates.

×
2011-2018 Ducati Diavel Magic Strobes Brake Light Flasher SALE

2011-2018 Ducati Diavel Magic Strobes Brake Light Flasher

$209.99 $262.99
Complete Plug & Play Intelligent Brake Light Flasher system for the 2011-2018 Ducati Diavel (USA Spec Only - with all-red tail lights). Microprocessor based system intelligently controls the OEM brake lights to function...
» View full product details
Share:
  • Allows for Run AND Turn operation of the OEM front blinker lamps on the 2011-2013 Ducati Diavel (2014-2018 compatibility unknown).
  • Complete plug-and-play harness with OEM connectors - no cutting/splicing and fully reversible.
  • Intelligent Microprocessor design controls the front OEM blinker lamps with PWM brightness control for dimmed running light (for LED heat management) and full contrast blink cycle (full bright to full off).
  • Fully compatible with the Ducati Diavel electronics and CanBus system - no fast-blink rates or error messages.
  • Detailed illustrated installation instructions.
  • Manufacturer direct purchase.
  • 1-Year Warranty & Satisfaction Guarantee.
  • Made in the USA.
  • Ships same business day.

Overview

This variation of our Blinker Genie is designed specifically for the 2011-2013 Ducati Diavel to allow the OEM front blinker lamps to function as run and turn - commonly known as the "DRL Mod".  The kit is 100% plug-and-play and fully reversible!  Compatibility with the 2014-2018 Diavel is yet unknown (contact us).

This product utilizes an advanced Microprocessor control system integrated into the harness, which operates the front blinker lamps at approximately 50% brightness as a constant running light.  This reduced brightness protects the longevity of the OEM blinker lamps as they were not designed to dissipate the heat of a constant duty cycle.  When the blinkers are engaged, the turning side will alternate between full-bright and off, to provide for the maximum blink contrast possible.  The running light will automatically resume when the blinker is canceled on the handlebars.

Having amber running lights in the front of the Diavel dramatically increases frontal visibility.  The OEM blinker lamps are quite intense and work perfectly for this application.

Check out the main product collection for other applications of our Blinker Genie.

Video

Features

Installation

Recommended Accessories

Instagram Feed

Tag us @Custom_LED_LLC in your Instagram Photos to see your photos here!
Customer Reviews
4.8 Based on 4 Reviews
5 ★
75% 
3
4 ★
25% 
1
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Customer Photos
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • play
  • turn signals
  • Install
  • bike
  • fog lights
  • modification
  • plastic
  • power
  • 2013
  • work
Custom LED Blinker Genie - Pre-Wired for 2011-2013 Ducati Diavel Review
10/20/2021

Diavel Blinker Genie

Quick shipping great product easy to install definitely plug and play and comes with step by step instructions

JS
Jose S.
United States
Custom LED Blinker Genie - Pre-Wired for 2011-2013 Ducati Diavel ReviewCustom LED Blinker Genie - Pre-Wired for 2011-2013 Ducati Diavel ReviewCustom LED Blinker Genie - Pre-Wired for 2011-2013 Ducati Diavel Review
05/20/2020

Works for my 2013 Multistrada, but with modifications.

Great product. I wanted a plug and play solution without having to cut into the wiring for the front turn signals. This product was designed for the DIavel so I took some risk in trying to make it work for my 2013 multi-Strada. Fortunately the turn signals plug set up was nearly identical. Once you takeoff the fuel tank, you can see large rubber protector’s that need to be pulled back. This exposes the turn signal plug-ins which need to be accessed. The power plug, did not work for my Multi-Strada. The power wiring must be different on the Diavel. I found a work around, by wiring positive 12 volt power from the GPS power connector which was unused on my bike. That plug is with the relays on the left side of the bike usually covered by the fuel tank. I connected the positive wire from this to the power plug. Now all works as it should. Make no mistake, this is not a quick install. It will require removing all the front plastic and removing the fuel tank. But, I was going to wire up front fog lights anyway, so I was already going to take these steps. In short, well-made product from a great company. Very clear instructions but they are for a different model. Slight modification to the power supply will allow this to function for a 2013 multi-Strada.

RB
Roy B.
United States
05/21/2020

Custom LED

Hello Roy, thank you for your review! I just want to make it clear for any shopping for this product, that it was designed specifically for the motorcycle model indicated, which is the 2011-2013 Ducati Diavel. This product is 100% plug-and-play for the 2011-2013 Ducati Diavel.

05/10/2020

Great products and service

High quality product.

AA
Abulfaz A.
United States
03/29/2020

Good product

Simple install good product overall

ZX
zhendong X.
Canada

Stay in Touch

Call Us

We'd love to here from you. Call us at 201-477-0031 and we'll be happy to answer any questions you have.

Free Shipping!

Get Free Shipping (USA only) on all orders over $199! Use Discount Code: $200ShipsFree

Latest News

  • Important Notice: Price Increase November 20, 2024

    Dear Valued Customers, For over two decades, we at Custom LED have been committed to delivering exceptional quality and value in our boutique electronics manufacturing company. Proudly manufactured in-house and crafted with carefully sourced components from around the world, our products... read more

  • 2015-2023 Yamaha YZF-R1 Ultimate Stealth Plate Mounts!

      Custom LED is proud to announce the Ultimate Stealth Plate Mount for the 2015-2023 Yamaha YZF-R1.  This is a perfect compliment to our Blaster-X Tail Lights, or as a stand-alone fender eliminator kit.  This kit has provisions for optional... read more

  • 2016-2020 Kawasaki ZX-10R Blaster-X Integrated LED Tail Light Pre-Orders Open!

    Great News! We are now accepting orders for the 2016-2020 Kawasaki ZX-10R Blaster-X Integrated LED Tail Light! Please visit the product page for more information and to place your order .   read more