custom motorcycle, integrator, yzf, gsx, cbr, zxr, integra tail, led lights, motorcycle light, integrated blinker, led blinker, motorcycle led lights,, motorcycle tail lights, fender eliminator, led retrofit, integrated blinker, tail light, LED strobe, flasher relay, led flasher, load equalizer
Custom LED Satisfaction Guarantee!

Secure E-Commerce

Please Enable Popups

2001-2002 Yamaha YZF-R6 Integrated LED Tail Light

High Performance LED Tail Light Retrofit Integrator Kit

2001-2002 Yamaha YZF-R6 Retrofit Kit (Circuit Board Only): MSRP: $99.99 SALE: $50.00!

ORDER CUSTOM LED 2001 2002 YZF-R6 INTEGRATED LED TAIL LIGHT 

OR CALL 606-432-1556

 

Custom LED does not sell this product directly.

Please click the "order here" button above to purchase from our distributor.

Custom LED 2001 2002 Yamaha YZF-R6 Integrated Tail Light Video

Integrated LED Tail Light

  • Overview

    That's right!  The best just got better!  We have taken all of our customers comments and combined them to improve our product.  The new Custom LED 2001-2002 R6 Integrated tail light has MORE LEDs and has a uniform distribution of red and yellow LEDs to uniformly light the stock lens.

    This is an integrated LED tail light retrofit of a stock 2001 or 2002 R6 tail light.  The internal workings of the factory LED tail light are removed and replaced with our Custom LED circuit board containing 60 Ultra Bright Red LEDs and 46 Ultra Bright Yellow LEDs.

    The Red LEDs function as running and brake lights (dual intensity).  The yellow LEDs serve as the blinker!  That's right - you're totally integrated with this tail, no need for any other rear blinkers.  To prevent color mixing and to create a dramatic effect, the unit will flash between the Red and Yellow LEDs on the side you're turning - super bright, super colorful, super noticeable!

    You can't even compare the brightness of this unit to the stock setup.  From the factory, you only get 20 LEDs in the stock tail compared to 106!  The LEDs you get with the Custom LED R6 Tail are the newest and brightest technology for LEDs.  The power draw increase is negligible due to a super efficient design on our part and the fact that LEDs are very efficient to begin with.

    The image below shows how the tail looks while turning with the running lights on.  The tail functions exactly the same when the brakes are applied - except the RED LEDs become much brighter.  Please allow time for the image to load fully.

    Note: the animated picture above is not of the new improved unit (0102R6_REV2) as you can see by the "square" layout of LEDs.  The new tails function the same except they are brighter and the whole entire lens is illuminated by the LEDs.

    If you would like to find out more information as to Custom LED's design concepts for the Integrated LED Tail Lights, and the purpose of them, read this introduction to Custom LED's Integrated LED Tail Lights.

  • Features

     

    • 60 Ultra Bright Red LEDs for running and brake lights.
    • 46 Ultra Bright Yellow LEDs for turn signals.
    • Custom LED ColorChangeÔ Technology on-board.
    • Detailed step by step instructions with illustrations for a simple install.
    • Smart color matched wires matches motorcycle wires for easy wiring.
    • Only 2 wires to hook up outside of tail light housing.
    • All electrical connectors and hardware provided with kit.
    • 24/7 customer support.
    • MADE IN THE USA!
    • NOT DOT approved.
  • Images

     
    STOCK 2001 2002 YAMAHA YZF-R6 TAIL LIGHT PCB
    STOCK 2001 2002 YZF-R6 LED TAIL LIGHT PCB

    CUSTOM LED 2001 2002 YAMAHA YZF-R6 INTEGRATED LED TAIL LIGHT PCB

    CUSTOM LED 2001 2002 YZF-R6 INTEGRATED LED TAIL LIGHT PCB

    Circuit board installs into OEM tail light housing according to provided instructions.

     

  • Installation

    The Custom LED 2001 - 2002 Yamaha YZF-R6 Integrated LED Tail Light retrofit kit must be installed into the OEM tail light.

    There may be additional accessories required to correct blinker problems on your motorcycle if you remove your OEM turn signals.  These accessories could not be built into the tail light, and are generally optional and specific to different customers needs, so they are sold separately. Please see the recommended accessories above, and read about the general issues and solutions in our Frequent Questions Page.  If you have any questions, please do not hesitate to contact us.

    Installation of this product requires that you remove the OEM tail light from the motorcycle for the retrofit kit installation.  Please consult a qualified technician or your repair manual for the proper procedure to remove the OEM tail light.

    Once the OEM tail light is removed from the motorcycle, installation of the Custom LED Integrated LED Tail Light is detailed in the instructions below.

    Custom LED 2001 2002 Yamaha YZF-R6 Integrated Tail Light Instructions

    click icon to download

     

    Adobe Acrobat Reader is required to view this file.

    If you are having problems viewing the file, please download the free software here.

  • Reviews

    Custom LED consistently receives rave reviews from our customers about our products!  We try to post a representative group of them on our feedback page on this site, but we can't post them all! 

    Our Feedback Profile on our Ebay Auctions are a great way to see what our customers think of our products, because Ebay promotes honest feedback.  Take a look at our Ebay Feedback!

    Our commitment to quality, honesty, ingenuity and customer service is really making an impact in an industry full of careless "sell anything" retailers and hack-artist copy-cats.  Trust in our products, and see for yourself...

© Custom LED LLC.  All Rights Reserved.